|
Welcome, Guest
Today is
Saturday, September 04, 2010 |
 |
|
|
|
|
| Member Of: |
 |
 |
 |
 |
|
|
|
|
| Custom Cable and PCBA
Testing |
|
 The Model 501 is the original Eclypse Analyzer and has become the
basic architecture, which is the basis for all Eclypse Analyzers. The Eclypse Model 501 (Bench
top layout shown) is simple to program and operate with its powerful "Realtime" test
software and user-friendly interface. It has the versatility to grow with your application by
allowing the user to expand the system in small or large increments. Expandable data lines in
the back of the system allow for additional points to be added as your requirements grow.
Model 501 can be "Stacked" in standard 19" rack systems with up to 128,000
points of switching. Many options are available for each model. |
| Test |
Resistance Measurement, 0.01
to 1000M ohms |
|
|
| Parameters |
4 Wire Kelvin Measurement, 0.01 to 9.99 ohms DC Voltage Measurement,
0.025 to 500VDC AC Voltage Measurement, 0.025 to 350VAC Capacitance
Measurement, 10nF to 99.9 µF Voltage Stimulus, 0.25 to 500VDC
Current Stimulus, 0.005 to 1 Amp |
|
|
Power
Requirements |
110 VAC 47-63Hz
(other power options available)
128 points to 128,000 points (in increments of 128) |
|
|
Standard
Software |
E.O. S. (Eclypse Operating Software)
ECLEDIT (Test file Editor)
IDE (Interface Device Editor) |
|
|
| Switching |
Remote Continuity Probe Latching Energization
Dual Programmable Power Supply (VPROG) |
|
|
| Addition
to the Custom Cables eMT tests Point to point: |
|
|
Optional
Accessories |
**Local tester for most computer cables including D-subminiature,
coaxial, RJ11/RJ45 telephone cables and USB. Easy to use and read LED display Tests USB A to USB B
Tests continuity of male and female 9-pin, 15-pin, 15-pin high density and 25-pin D-subminiature
cables Tests continuity of: 36 -pin Centronics printer cables, RJ11, RJ12 and RJ45 phone cables,
and 50 and 75 ohm coaxial cables Tests D -sub and phone cables up to 1000’ (305 Meters) Tests
50 ohm cables up to 1000’ (305 meters) and 75 ohm cables up to 600’ (183 meters) |
|
|
|
| In Circuit and Flying Probe PCBA Testing |
 utilizes an alliance partner who is a full engineering test services
company with offices in the Southern California. We provide full ATE programming, Fixturing
and PCB test and repair for corporations all around the world. In partnership with our
clients, we enhance production through state of the art technology We believe that content
rules and creativity delivers. This is reflected in our project management teams, which are
composed of systems development managers and test engineers. Our management teams work well in
corporate environments, and can conform our designs to the styles and constraints of any
production problems, issues or concerns. Backed by the creative talent of top engineers, we
develop high-level test program sets that will speed your production facilities along. Listed
below are some of the disciplines that we bring to the table.Test programs for
GenRad 227X and 228X Series In-Circuit Testers
- Test programs for Schlumberger Series 700, 720, 730, 733, 750, and 770 Systems
- Test programs for Schlumberger Series 333 (303, 303S, 333) Systems
- Turn-key production ready programs fine-tuned for use on your in circuit tester
- Higher manufacturing yields with comprehensive test routines
- Detailed documentation to analyze and measure the quality of test production
- Quicker diagnostics through customized cross-referencing
- Scorpion Flying Probe Test
 ATE
Fixturing
- GenRad Series
- Factron Thinline Series
- Everett Charles Series
- Hewlett Packard Series
- Zehntel Series
- SMD Fixturing
Test Engineering
 Consulting for specific ATE needs- Circuit Analysis for testability
- Flying Probe Testability services
- Customized IC test routines
|
|
|
|
|
|
|
